Looking for a new SSD is not an easy task because there are many things that you may have to consider, moreover, there are also so many of them in the market to choose. From those come from a well-known manufacturer to those who are not that popular. In today Seagate 600 vs Samsung 840 article, we are going to compare these two popular drives to give you more information regarding what you can expect from them. If one/both of them took your interest, go check our article below.
In this article, we are going to give you information about:
– What are Seagate 600 and Samsung 840
– What Seagate 600 and Samsung 840 can offer to you
– Seagate 600 vs Samsung 840
About Seagate 600
Seagate has been leading the SSD market together with Intel, and Western Digital in the early market years ago simply because it is one of the leaders in hard drives market, so it is not unusual for them to also compete in the SSD market. The Seagate 600 is actually released quite some time ago around 2013 together with its Pro model and also the company entry to the consumer solid-state device.
Coming with 2.5-inch form factor making it is versatile to be mounted in most laptop or desktop when it was first release even though it is not that special anymore today. You can use an adapter to fit it in your computer if it needs 3.5-inch ones.
Seagate 600 Features
Seagate 600 comes with the same controller used in Corsair Neutron and Neutron GTX which is the Link A Media Device’s LM87800 controller. We know that the previous model from the company used two-chip solution by their custom silicon controlling the host interface while Link A Media will provide a NAND interface chip. This is not the case anymore in this SSD because it used a single chip integration from Seagate previous design, which controller used the drive chassis for cooling and the thermal pad as an interface layer.
What’s unique here is whether Seagate have access or not into the firmware source because there is a definitely custom solution for the performance consistency. The LM87800 is paired with DDR2-800 and with roughly 1MB of DRAM per GB of NAND storage that is very common in drives with flat indirection. As the performance consistency increased this model is seen to be a costly decision and more power hungry.
Even when the drive was first released, this controller is already seen as an outdated compared to what’s comes with Crucial M500. In Seagate 600 there is no hardware encryption as well as eDrive certification. Even though it is launched in 2013, the drive somehow still comes with a controller that distinctly 2012. However, this is may caused by many manufacturers who want to wait for the transition to SATA Express at that time before launching new controller design.
Seagate 600 Price and Warranty
Seagate 600 is available in capacity up to 480GB, but not all of them are easy to find. In present day the drive is priced around $174.99 for the 240GB capacity, which makes it down to 72 cents per GB. It may depend on the seller but the warranty for the drive is listed to be 3 years.
About Samsung 840
Samsung have been around and shows a great progress in the SSD market, proven by many of their releases that always took people interest. Even though their entry marked with 470, the company hasn’t receive media attention back then and only got them with the launch of 830, which was one of the best consumer SSDs on the market at that time. They seems to take a big step forward with 840 and 840 Pro. For starter, the drive used 3-bit-per-cell MLC NAND or shorten as TLC. Read also : Samsung 840 EVO vs Pro here.
Samsung 840 Features
Today, the TLC vs MLC is not relevant anymore to talk to because of how far this NAND have improved but since this drive is released years ago in 2013, it was not the case at that time. Samsung is actually the first manufacturer to use a TLC because they have an access to the manufacturing unlike some other company out there that is pushed to use what the market is willing to sell to them. What separate the regular and Pro model is that the Pro use MLC.
As we know, SLC stores one bit per cell, MLC store two, and TLC store 3. The problem is there in no multiple of three that is a power of two since SSD are typically go in powers of two. However, for home use, there shouldn’t be a problem to make this drive fulfill its duty since most light users will only works no more than 10GiB of writes per day. Even though it is shorter than MLC, we are still talking about years here.
Taken from anandtech, Samsung 840 shows a fast performance than most of previous generation MLC NAND based SSDs they have tested, which proven how good Samsung tweak the controller and firmware to get things right even though with slower and lower NAND endurance.
Samsung 840 Price and Warranty
The drive is available up to 500GB and in present day, the cost used to get it is around $149.95 for 120GB capacity, which makes it down to $1.25 per GB. Samsung also provide 3 years warranty for the product to make sure it will fulfill its life.
Now, let’s compare Seagate 600 with Samsung 840. Both of them are released very close to each other in the same year. The basic difference between both of them is of course the NAND type because Seagate use MLC and Samsung use TLC as well as what controller they put inside and the firmware. In performance, both of them are very similar and equally good. Another difference is the GB capacity available because Seagate is available up to 480GB while Samsung available up to 500GB.
Seagate 600 Vs Samsung 840
All in all, the decision is all yours to make. When looking for an SSD, performance is usually on top of the list. These two performs similarly, so whichever you choose shouldn’t be that different. However, price and warranty is another important thing to consider, Seagate is more affordable and comes with similar 3 years warranty, so we will recommend you Seagate 600 for the low price and similarly good performance.